-(1).webp){kind=logo}
| Model Number | LF91A-AD4-H5 | LF91A-BD4-H5 | LF91A-AD6-H5 | LF91A-BD6-H5 | LF91A-ADI-H5 | LF91A-BDI-H5 | ||||||||||||||||||
| LF91A-AD5-H5 | LF91A-BD5-H5 | LF91A-AD7-H5 | LF91A-BD7-H5 | LF91A-ADU-H5 | LF91A-BDU-H5 | |||||||||||||||||||
|
Detection Range |
50...500mm | 70...1000mm | 50...500mm | 70...1000mm | 50...500mm | 70...1000mm | ||||||||||||||||||
|
Dead Zone |
0...50mm | 0...70mm | 0...50mm | 0...70mm | 0...50mm | 0...70mm | ||||||||||||||||||
|
Transducer Frequency |
Approx.380KHz | Approx.205KHz | Approx.380KHz | Approx.205KHz | Approx.380KHz | Approx.205KHz | ||||||||||||||||||
|
Response Time |
Approx.50ms | Approx.125ms | Approx.50ms | Approx.125ms | Approx.50ms | Approx.125ms | ||||||||||||||||||
|
Switching Frequency (Standard Target Plate) |
≤8 Hz | ≤3 Hz | ≤8 Hz | ≤3 Hz | 100mm* 100mm | |||||||||||||||||||
|
Output Type |
D4 NPN NO/NC Selectable |
D6 Two Switching Outputs PNP NO/NC Selectable |
DI 4..20mA Short Circuit/Overload Protection |
|||||||||||||||||||||
|
D5 PNP NO/NC Selectable |
D7 Two Switching Outputs NPN NO/NC Selectable |
DU 0-10V |
||||||||||||||||||||||
|
Rated Operating Current |
200mA Short Circuit Protection/Overload Protection |
2*100mA Short Circuit Protection/Overload Protection |
DI ≤45mA DU ≤50mA |
|||||||||||||||||||||
|
Operating Voltage |
10-30V DC Ripple 10% |
15-30V DC Ripple 10% |
||||||||||||||||||||||
|
Repeat Accuracy |
≤1% |
±1.5% of Full Scale |
||||||||||||||||||||||
|
Range Adjustment |
Adjustable for Farthest and Nearest Range via Adjustment Line |
|||||||||||||||||||||||
|
Protection Grade |
IP65 | |||||||||||||||||||||||
|
Connection Method |
H5 (5-pin) M12 Connection Cable / 2m PVC Cable |
|||||||||||||||||||||||
|
LED Yellow Light |
Switching Status Indication – Yellow light flashes when target is detected under setting state |
|||||||||||||||||||||||
|
LED Red Light |
Red light always on: Error Red light flashing: No target detected under setting state |
|||||||||||||||||||||||
